Download the latest RE-1 firmware update  software below. This firmware update contains all fixes to date. Only the latest firmware update needs to be programmed into the RE-1.

Downloads

 

Release Notes

 

ReadyEdge Firmware Version 1.0.54

(Release Date Web – 5/1/26)

(Release Date Production – 6/1/26)

 

***Requires Mobile App Version  v1.2.3(2)  for iOS, or v2.0.42 for Android or Higher***

 

NEW

  • Enables SolarConnect Over the Air (OTA) Firmware Updates

 

 

ReadyEdge Firmware Version 1.0.53

(Release Date Web – 2/9/26)

(Release Date Production – N/A)

 

***Requires Mobile App Version  v1.2.1(2) for iOS, or v2.0.21 for Android or Higher***

 

 FIXES

  • Occasional Ethernet Comms Loss when SolarConnect is Enabled and the Ethernet Connection is Lost or Disconnected
  • IoT Correctly Recovers after Ethernet Disconnect
 
 
 
ReadyEdge Firmware version 1.0.51

(Release Date:  Web – 11/15/25)

(Release Date: Production – N/A)

 
Fixes
  • SureSine Connected Product now reports LOAD_STATE correctly in SNMP
  • Allow disabling of all SNMP versions
  • Add “Disable” checkbox to connected charge controller setup fields
  • Support copying IoT claim code to clipboard

 

Known Issues
  • Connected Product may not reboot after settings edit
  • Simultaneous Modbus Commands to “Bridged” products may lock communications
  • Moving Relay Block Position after AGS Configuration results in Fault and Reposition or Factory Reset to Resolve
  • Faults / Alarms tables for AGS Setup may not be accurate for all Porduct Models
  • Setting a Custom Engine ID in SNMP v3 may work incorrectly / erroneously affect other SNMP settings